Resistor#

The Resistor block implements a linear resistor model described by the following expression (1):

(1)#\[ U=\mathrm{I}\cdot\mathrm{R} \]

where \(R\) - active resistance of the resistor.

The positive direction of current in the resistor is defined as flowing from the input port to the output port. The voltage across the resistor is determined as the potential difference between the input and output ports.

1. Properties#

Property	Default Value	Description	Units of measurement
Resistance	10	–	Ohm

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
+	Input	–	–	Electronics
-	Output	–	–	Electronics

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Examples of use#

Examples of using this block can be found in the following sections:

Tutorials;
How-to guides;
Description of Demo.

Tutorials

Library	Tutorial name
Electronics	DC circuit; Inductance in AC circuit; Inductance in DC circuit; Single machine power system powered by inverter

How-to guides

Section	Guide name
Electrical equipment / Power industry	Simulation of static thyristor compensator