Ideal switch#
Block appearance in REPEAT VISION#
The Ideal switch block implements a model of an ideal commutator, which has an internal resistance in the closedposition and is controlled by a signal applied to the Logic Port. Signal value 0 corresponds to the switch open position, any othervalue corresponds to the closed position. Switch changeover is immediate.
At the user’s option, it is possible to take into account the inertialproperties of the switching device due to the damper circuit, which isa serial RC circuit connected in parallel to the circuit breaker.
1. Properties#
Property |
Default value |
Description |
Units of measurement |
|---|---|---|---|
Internal resistance |
1e-3 |
– |
Ohm |
Snubber resistance |
1e6 |
Available, when |
Ohm |
Snubber capacitance |
1e9 |
Available, when |
F |
On |
– |
– |
|
Initial status: |
Open |
– |
– |
2. Inputs and outputs#
Parameters |
Input/Output |
Description |
Units of measurement |
Port type |
|---|---|---|---|---|
Control input |
Input |
– |
– |
Automation |
+ |
Input |
– |
– |
Electronics |
- |
Output |
– |
– |
Electronics |
In order to see the connection capabilities of the block, you need to go to page Description of block ports
3. Examples of use#
Examples of using this block can be found in the following sections:
Tutorials
Library |
Tutorial name |
|---|---|
Electronics |