Addition (linear combination)#

The Addition (linear combination) block sums input signals with specified amplification coefficients. The number of ports and their gain factors are specified as an array in the block property.

Hint

A record of “1; 1; 1” form will create 3 input ports with a gain of 1 for each port.

1. Properties#

Property	Default value	Description	Units of measurement
Signal gain coefficients	1;1	The number of values entered with “;” is equal to the number of input ports	-

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
Input 1	Input	-	-	Automation
Output	Output	-	-	Automation

Note

The number of Input parameters is specified by the value of the Signal gain coefficients property. Each Input is numbered sequentially (Input 1, Input 2, Input 3 …).

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Code generation#

Important

Block supports C source code generation

4. Examples of use#

Examples of using this block can be found in the following sections:

Tutorials;
How-to guides;
Description of Demo.

Tutorials

Library	Tutorial name
Heat exchange	Cooling of the part after heating in the furnace
External models	Implementing a moving average filter using a Java-function block
Electronics	Single machine power system powered by inverter

How-to guides

Section	Guide name
Electrical equipment / Power industry	Simulation of static synchronous compensator based on voltage converter