Reservoir (P)#

block — Block appearance in REPEAT VISION#

The Reservoir (P) unit simulates a reservoir of infinite volume with a given constant value of gauge pressure and temperature.

In the controlled mode, temperature and pressure can be changed during the calculation process and are set by sending a signal to the respective ports of the block.

1. Properties#

Property	Default value	Description	Units of measurement
Controlled mode	Off	-	-
Gauge pressure, available when `Controlled mode` - `Off`	30000.0	-	Pa
Temperature, available when `Controlled mode` - `Off`	20.0	-	℃
Ports cross-sectional area	0.2	-	m\(^2\)

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
Input	Input	-	-	Pneumatics
Output	Output	-	-	Pneumatics
Gauge pressure, available when `Controlled mode` - `On`	Input	-	Pa	Automatic
Temperature, available when `Controlled mode` - `On`	Input	-	℃	Automatic

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Examples of use#

Examples of using this block can be found in the following sections:

Tutorials;
How-to guides;
Description of Demo.

Tutorials

Library	Tutorial name
`Pneumatics`	Gas outflow to a cylinder through a tube with a narrowing

How-to guides

Section	Guide name
Machine learning approximation	Approximation model of gas flow through a nozzle
Solving optimization tasks	Maximizing gas production rate in the gas well cluster collection system