Weighted Sample Time Math#

The Weighted Sample Time Match block outputs the weighted sampling time, weighted sampling rate or mathematically adjusted weighted sampling time depending on the settings of the parameters Type of Operation and Sample Time Weight and the execution context of the function output.

Note

Use the Sample Time Weight parameter to specify the calculation time weight factor.

Hint

One can use a block to extract a sample time from a signal. To do this, set the value Sample Time for the parameter Type of Operation and the value 1.0 for the parameter Sample Time Weight. With this configuration, the block outputs an input signal sample time.

The block calculates its output using priority rules for operators. For example:

For Plus operation type (1) :

(1)#\[y+(\Delta t \cdot w) \]

For Division operation type (2) :

(2)#\[y/(\Delta t \cdot w) \]

1. Properties#

Property	Default Value	Description	Units of measurement
Type of operation	Plus	-	-
Sample time weight	1.0	-	-

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
Input	Input	-	-	Automation
Output	Output	-	-	Automation

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Code generation#

Important

Block supports C source code generation

Hint

The block supports displaying values of coefficients on blocks instead of an image of the block itself