Mode LED#
Block appearance in REPEAT VISION#
The Mode LED block represents a model of a physical LED that lights up for a given period of time.
Note
In the block properties, the Lower limit range and the Upper limit range are configured, within which the LED is in the enabled state (state of logical 1), as soon as the input signal is outside the specified range, the LED turns off (state of logical 0) (1) :
(1)#\[\begin{split}y(t) =\begin{cases}1 , & \ y_{min}<x<y_{max}\\0, & n, & y_{min}\geq x\\0,& x,&x\geq y_{max} \end{cases}\end{split}\]
where:
\(y_{min}\) - lower boundary;
\(y_{max}\) - upper boundary.
1. Properties#
Property |
Default Value |
Description |
Units of measurement |
|---|---|---|---|
2 |
- |
- |
|
10 |
- |
- |
2. Inputs and outputs#
Parameters |
Input/Output |
Description |
Units of measurement |
Port type |
|---|---|---|---|---|
Input signal |
Input |
- |
- |
Automation |
Output |
Output |
- |
- |
Automation |
In order to see the connection capabilities of the block, you need to go to page Description of block ports