Power circuit breaker#
Block appearance in REPEAT VISION#
The Power circuit breaker block implements a model of a power circuit breaker, which has an internal resistance in the closed position and is controlled by a signal applied to the Control port. If the signal value is <1 and (the current value has crossed zero or was opened in the previous step), the key switch position is open and any other state is the closed position. Switching the key to open position occurs when current value passes through zero and the key closes immediately.
1. Properties#
Property |
Default Value |
Description |
Units of measurement |
|---|---|---|---|
Internal resistance |
1e-3 |
– |
Ohm |
Off-state resistance |
1.0e8 |
– |
Ohm |
On |
– |
– |
|
Snubber resistance |
1e6 |
Available, when |
Ohm |
Snubber capacitance |
1e-6 |
Available, when |
F |
2. Inputs and outputs#
Parameters |
Input/Output |
Description |
Units of measurement |
Port type |
|---|---|---|---|---|
Control input |
Input |
– |
– |
Automation |
+ |
Input |
– |
– |
Electronics |
- |
Output |
– |
– |
Electronics |
In order to see the connection capabilities of the block, you need to go to page Description of block ports