Phase fluid properties meter (MF)

Block appearance in REPEAT VISION

 The Phase fluid properties meter (MF) block allows measuring a number of phase properties of a multicomponent medium, table 1.

Note

The number and composition of the measured properties is determined by the user using the corresponding block properties.

Table 1 – Available measurable properties

Property	Unit of measurement
Density	\(\frac{kg}{m^3}\)
Molar mass	\(\frac{kg}{mol}\)
Specific isobaric heat capacity	\(\frac{J}{kg \cdot K}\)
Specific isochoric heat capacity	\(\frac{J}{kg \cdot K}\)
Speed of sound	\(\frac{m}{s}\)
Enthalpy	\(\frac{J}{kg}\)
Entropy	\(\frac{J}{kg \cdot K}\)
Joule-Thomson coefficient	\(\frac{℃}{bar}\)
Dynamic viscosity	\(Pa\cdot s\)
Thermal conductivity	\(\frac{W}{m \cdot K}\)

1.  Properties

Property	Default Value	Description	Units of measurement
Phase: Liquid phase; Gas phase; Oil phase; Aqueous phase	Liquid phase	-	-
Density	On	-	-
Phase fraction	On	-	-
Molar mass	Off	-	-
Specific isobaric heat capacity	Off	-	-
Specific isochoric heat capacity	Off	-	-
Speed of sound	Off	-	-
Enthalpy	Off	-	-
Entropy	Off	-	-
Joule-Thomson coefficient	Off	-	-
Dynamic viscosity	Off	-	-
Thermal conductivity	Off	-	-

2.  Inputs and outputs

Parameters	Input/Output	Description	Units of measurement	Port type
Input	Input	-	-	Multicomponent fluid
Density	Output	Available, when Density - On	kg/m\(^3\)	Automation
Phase fraction	Output	Available, when Phase fraction - On	-	-
Molar mass	Output	Available, when Molar mass - On	kg/mol	Automation
Specific isobaric heat capacity	Output	Available, when Specific isobaric heat capacity - On	J/(kg·K)	Automation
Specific isochoric heat capacity	Output	Available, when Specific isochoric heat capacity - On	J/(kg·K)	Automation
Speed of sound	Output	Available, when Speed of sound - On	m/s	Automation
Enthalpy	Output	Available, when Enthalpy - On	J/kg	Automation
Entropy	Output	Available, when Entropy - On	J/(kg·K)	Automation
Joule-Thomson coefficient	Output	Available, when Joule-Thomson coefficient - On	J/(kg·K)	°C/bar
Dynamic viscosity	Output	Available, when Dynamic viscosity - On	Pa·s	Automation
Thermal conductivity	Output	Available, when Thermal conductivity - On	W/(m·K)	Automation

In order to see the connection capabilities of the block, you need to go to page Description of block ports