Sampled sinusoidal wave#

The Sampled sinusoidal wave block implements discrete form of sine signal of specified frequency and amplitude. The block allows you to set three different types of discretization, i.e. the time interval between the recorded values of the sinusoidal signal:

Decimation of the fundamental sampling rate of the project - the output signal has a sampling rate N times less than the sampling rate of the project (the inverse of the integration step). Here, N is a given design fundamental sampling rate decimation factor, N ≥ 1.
Sampling period is the interval between time points at which the sine signal values are sampled. The value of the specified sampling period shall be a multiple of the integration step specified in the project.
Sampling frequency - sampling rate of sine signal values. The value of the specified sampling frequency shall be a divider of the sampling frequency specified in the design (the value opposite to the integration step).

1. Properties#

Property	Default Value	Description	Units of measurement
Frequency	1.0	-	Hz
Magnitude	1.0	-	-
Bias for vertical axis	0.0	-	-
Phase	0.0	-	Degrees
Sampling type: Fundamental project frequency decimation; Sample time; Sampling frequency	Fundamental project frequency decimation	-	-
Decimation factor of project fundamental discretization frequency, available when selecting `Sampling type` - `Fundamental project frequency decimation`	2	-	-
Sample time, available when selecting `Sampling type` - `Sample time`	0.05	-	s
Sampling frequency, available when selecting `Sampling type` - `Sampling frequency`	5	-	Hz

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
Output signal	Output	-	-	Automation

In order to see the connection capabilities of the block, you need to go to page Description of block ports