GO FROM#

The GO FROM block is a paired block and operates in conjunction with GO TO.

The GO FROM block is used to assign communication between other blocks, it is the output (it is connected to the input of block that needs to be connected to another block). Connection of GO FROM block, Fig. 1 :

Each GO FROM block (if there are several of them) is connected to the corresponding input of the block, which shall be connected to the block connected to GO TO block (see Fig. 2 below), which helps not to overload the circuit with connecting lines, improving the readability of the circuit, or allows to connect blocks that are at a great distance from each other.

Fig. 2 Example of connection of block 1 with blocks 2 - 4 using paired GO TO and GO FROM blocks#

If it is necessary to connect one block with several blocks, then several GO FROM blocks can be used with GO TO (input). In this case, for correct communication between GO TO block (input) and GO FROM blocks (output), it is necessary to register the same names inside these blocks, if the names match, the blocks will be highlighted in the same color, see Fig. 3 below. The block highlighted in red signals that it has no pair in the circuit.

Fig. 3 Example of GO TO and GO FROM blocks with the same and different names#

Rename GO FROM block in block properties in the right pane in Title column.

1. Properties#

Property	Default Value	Description	Units of measurement
Title	А	-	-

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
-	Output	-	-	Automation

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Примеры использования#

С примерами использования данного блока можно ознакомиться в следующих разделах:

Практическое руководство;
Уроки;
Описание Демо-проектов.

Практическое руководство

Раздел	Название руководства
Энергетика	Development of a model of the industrial circuit system of oil coolers of NPP with WCWR