Demux#
Block appearance in REPEAT VISION#
The Demux block converts the input vector signal into scalar signals, the number of which corresponds to the size of the input vector signal. For correct operation of the block, the number of output ports shall correspond to the size of the input vector signal. In the current implementation, the block is paired with a Multiplexer block. It is also possible to use with GO TO - GO FROM blocks.
1. Properties#
Property |
Default value |
Description |
Units of measurement |
|---|---|---|---|
3 |
- |
- |
2. Inputs and outputs#
Parameters |
Input/Output |
Description |
Units of measurement |
Port type |
|---|---|---|---|---|
Input |
Input |
- |
- |
Automation |
Output |
- |
- |
Automation |
|
Output |
- |
- |
Automation |
|
Output |
- |
- |
Automation |
Note
The number of output ports is specified in the property Number of output ports
In order to see the connection capabilities of the block, you need to go to page Description of block ports
3. Code generation#
Important
Block supports C source code generation