Pump tabulated (IH)#

Simplified version of centrifugal pump without reference data and shaft angular velocity

The block describes the operation of the pump according to a given Q-H characteristic.

Pump pressure increment is described by the formula (1):

(1)#\[\Delta P=\Delta H_{ref}(q)\cdot \rho \cdot g\]

where:

\(\Delta H_{ref}(q)\) - pressure characteristic is determined by linear interpolation by vectors of volumetric flow rate and head, [m];

\( ho\) - fluid density, [kg/m\(^3\)];

g - free fall acceleration, [m/s\(^2\)].

Volumetric flow rate is defined as (2):

(2)#\[q=\frac{\dot{m}}{\rho}\]

where \(\dot{m}\) - mass flow rate of liquid, [kg/s].

1. Properties#

Property	Default value	Description	Units of measurement
Head vector	50.0; 47.5; 45.0; 40.0; 35.0; 25.0	-	m
Flow vector	16.67; 30.0; 40.0; 53.33 66.67; 83.33	-	lpm

Parameters	Input/Output	Description	Units of measurement	Port type
Input	Input	-	-	Isothermal hydraulics
Output	Output	-	-	Isothermal hydraulics

In order to see the connection capabilities of the block, you need to go to page Description of block ports