Current source#

block — Block appearance in REPEAT VISION#

The Current source implements the operation of a non-ideal DC or sinusoidal current source. The positive direction of current is assumed to be the direction away from the output port (corresponding to the block icon (#title1)). The current magnitude is determined by the following expressions:

Source type DC (1)

(1)#\[ I=J\cdot\mathrm{U}\mathrm{g} \]

where \(J\) is the specified value of direct current;

Source type AC (2):

(2)#\[ I=I_{m}\mathrm{s}\mathrm{i}\mathrm{n}\left(2\pi \mathrm{f}\mathrm{t}+\phi \right)\cdot \mathrm{U}\mathrm{g} \]

where:

\( I_m \) - amplitude value of current, [A];

\( f \) - source frequency, [Hz];

\( \phi \) - initial phase, [°];

\( g \) - internal conductivity, [S].

1. Properties#

Property	Default Value	Description	Units of measurement
Source type: DC; AC	DC	–	–
Current, available when selecting `Source type` - `DC`	10	–	А
Amplitude, available when selecting `Source type` - `AC`	100	–	А
Frequency, available when selecting `Source type` - `AC`	50	–	Hz
Phase, available when selecting `Source type` - `AC`	0	–	°
Internal conductance	0	–	S

2. Inputs and outputs#

Parameters	Input/Output	Description	Units of measurement	Port type
-	Input	–	–	Electronics
+	Output	–	–	Electronics

In order to see the connection capabilities of the block, you need to go to page Description of block ports

3. Examples of use#

Examples of using this block can be found in the following sections:

Tutorials;
How-to guides;
Description of Demo.

How-to guides

Section	Guide name
Electrical equipment	Creating a battery management system