Turbine#
Block appearance in REPEAT VISION#
A turbine is a device with a continuous working process and with a rotary movement of the working element, in which the kinetic energy and/or internal energy of the working fluid (steam, gas, water) is converted into mechanical work on the shaft.
1. Properties#
Property |
Default Value |
Description |
Units of measurement |
|---|---|---|---|
Controller deadband |
0 |
– |
% |
Proportional coefficient of the speed controller |
10 |
– |
r.u. |
Time constant of the controller |
0.1 |
– |
s |
Servo motor opening speed |
1 |
– |
r.u./s |
Servo motor closing speed |
1 |
– |
r.u./s |
Integrator gain 1/T (Servomotor time constant) |
1/0.2 |
– |
– |
HPC volume time constant |
0.2 |
– |
s |
Time constant of LPC volumes |
3 |
– |
s |
HPC generated power |
0.3 |
– |
r.u. |
Nominal power |
70 |
– |
MW |
2. Inputs and outputs#
Parameters |
Input/Output |
Description |
Units of measurement |
Port type |
|---|---|---|---|---|
Turbine in work |
Input |
– |
– |
Automation |
Power setpoint |
Input |
– |
r.u. |
Automation |
Speed setpoint |
Input |
– |
r.u. |
Automation |
Speed feedback |
Input |
– |
r.u. |
Automation |
Turbine power |
Output |
– |
r.u. |
Automation |
Turbine power |
Output |
– |
W |
Automation |
In order to see the connection capabilities of the block, you need to go to page Description of block ports