Compressor Tabulated Pump (P)#

simplified version of compressor without reference data and shaft angular velocity

The block describes the compressor operation by characteristics.

The block stores mass so that (1)

(1)#\[\dot m_A+\dot m_B=0\]

Compressor mass flow rate is determined by characteristics of mass flow rate vector from pressure ratio vector.

\(\dot m\) - gas mass flow rate, [kg/s].

Law of conservation of energy (2):

(2)#\[\phi_A+\phi_B+P_{fluid}=0\]

where \(P_{fluid}\)=\(\dot m_A \cdot \Delta h_{total}\)

\(P_{fluid}\) - work on gas (flow rate for enthalpy change).

1. Properties#

Property	Default Value	Description	Units of measurement
Port area	0.1	-	m\(^2\)
Mass flow vector	29.013; 28.747; 28.641; 28.412; 28.06; 27.098; 25.306	-	kg/s
Pressure ratio vector	4.841; 5.445; 5.988; 6.628; 7.222; 7.323; 7.573	-	dimensionless value

Parameters	Input/Output	Description	Units of measurement	Port type
Input	Input	-	-	Pneumatics
Output	Output	-	-	Pneumatics

In order to see the connection capabilities of the block, you need to go to page Description of blocks ports